ACCESORII CABLU 

Nu sunt produse in aceasta categorie

Subcategorii

  • Bride cablu forjate Crosby®

    *Bridele Crosby, toate mărimile, cu excepţia 68-72mm si 85-90mm îndeplinesc normele EN13411: 2003. Bridele Crosby, toate dimensiunile de la 6 mm şi mai mari, sunt in conformitate cu Federal Specification FF-C-450 tip 1 clasa 1, cu excepţia altor cerinte necesare de către contractant.
    *Pe baza fiecarui produs este forjat un Cod de Identificare Produs (PIC) pentru urmarirea materialului, numele Crosby sau CG si dimensiunea acestuia.
    Important!!! Produsele CROSBY satisfac si alte cerinte esentiale de performanta inclusiv durabilitatea, proprietatile la impact si trasabilitatea materialelor, care nu sunt abordate de ASME B30.26.
    Cauta Red-U-Bolt ®, asigurarea dumneavoastra pentru Bride Crosby originale.

  • Bride cablu DIN 741

    Bride de cablu turnate DIN741
    Material : Punte : turnata
               Surub-U : otel slab-aliat
    Standard: DIN 741
    Finisare: Electro-galvanizare

  • Rodante cablu G411 - Wire Rope Thimbles

    Hot Dip galvanized steel.
    The standard choice for light duty applications and loading conditions.
    Meets the performance requirements of EN13411-1:2002.

  • Carlige Choker alunecare cablu

    Carlig cu alunecare pe cablu model 112
    Carlig cu alunecare pe cablu cu siguranta
    Carlig cu alunecare pe cablu cu factor de siguranta 4:1
    Culoare carlig cu alunecare pe cablu : vopsit rosu
    Carlig cu alunecare pe cablu pentru instalatii de ridicare cu capacitati intre 1.5 tone si 5 tone
    Carlig cu alunecare pe cablu pentru instalatii de ridicare pentru dimensiune cablu intre 3/8" si 1"

  • Intinzator cablu Furca-Furca
  • Intinzator cablu Carlig-Carlig
  • Intinzator cablu Ochi-Carlig
  • Intinzator cablu Ochi-Ochi
  • G417 - Closed Spelter Socket Crosby®

    Forged Steel Sockets through 38mm, cast alloy steel 40mm through 100mm.
    Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 36, IPS or XIP (EIP) , XXIP (EEIP), RRL, FC or IWRC wire rope. Strand constructed with minimal number of wires (e.g. 1 x 7) requires special consideration that socket basket be five (5) times the strand diameter or fifty (50) times the wire diameter, whichever is the greater.

  • S421T - Wedge Socket Crosby®

    Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP
    wire rope.

    Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design
    factor, proof load and temperature requirements. Importantly, these sockets meet other critical
    performance requirements including fatigue life, impact properties and material traceability, not
    addressed by ASME B30.26.

    Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules.
    1-1-17.7, and ABS Guide for Certification of Cranes.

  • SS450 Wire Rope Clip Crosby®

    Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or “CG”,
    and a size forged into it.
    Entire clip is made from 316 Stainless Steel to resist corrosive and rusting action.
    All components are Electro-Polished.
    All Clips are individually bagged or tagged with proper application instructions and warning information

  • G429 - "Fist Grip® " Wire Rope Clip Crosby®

    Entire clip is Galvanized to resist corrosive and rusting action.
    Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 5mm - 22mm sizes, and 90% for sizes 24mm through 40mm.

  • G460 - Soft Eye Bundle Clip Crosby®

    ASTA E PRODUS!!!

  • G461 - Soft Eye Bundle Clip Crosby®

    ASTE E PRODUS!!!

  • S423T - Super Terminator Crosby®

    Patent Pending design eliminates the difficulty of installing high performance wire rope into a
    wedge socket termination.
    Proper application of the Super TERMINATOR™ eliminates the “first load” requirement of
    conventional wedge socket terminations.
    S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T TERMINATOR™ wedge sockets.
    Wedge and accessories provided with a zinc finish.
    Meets the performance requirements of EN13411-6:2003.

  • US422T - Wedge Socket with Terminator Wedge

    Basket is cast steel and individually magnetic particle inspected.
    Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP
    wire rope.
    Wedges are color coded for easy identification.

  • G517 Mooring Socket Crosby®

    Papuc cablu  acostare - amarare
    Dispozitiv de prins cablul
    Wide range of sizes available:
    32mm through 102mm Wire Line
    “M-Line” socket terminations have a 100% efficiency rating, based on the catalog strength of the wire rope

  • Wirelock W416-7 Resin for Spelter Sockets

    Note: For use on 416, 417, 427 and 517 spelter sockets only

  • Booster Packs for Wirelock® W4167

    For use on 416. 417.427 and 517 spelter sockets only

  • S-412 Solid Wire Rope Thimbles
  • SS-414 Stainless Steel Thimble

    Available in Hot Dip galvanized or Stainless Steel (Type 304).
    Meets the performance requirements of EN13411-1:2002.
    Stainless steel recommended for more corrosive environments where greater protection is
    required.
    Greater protection against wear and deformation of the wire rope eye.
    Longer service life.

  • G408 - Open Pattern Thimbles

    Hot Dip galvanized Steel.
    Meets the performance requirements of EN13411-1:2002.
    Recommended for light duty applications in which it is being assembled into another fitting (i.e.,
    shackle or master link).

  • G414 - Extra Heavy Wire RopeThimbles

    Available in Hot Dip galvanized or Stainless Steel (Type 304).
    Meets the performance requirements of EN13411-1:2002.
    Stainless steel recommended for more corrosive environments where greater protection is required.
    Greater protection against wear and deformation of the wire rope eye.
    Longer service life.

  • G416 - Open Spelter Socket

    Forged Steel Sockets through 38mm, cast alloy steel 40mm through 102mm.
    Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 36, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
    Strand constructed with minimal number of wires (e.g. 1 x 7) requires special consideration that socket basket be five (5) times the strand diameter or fifty (50) times the wire diameter, whichever is the greater.

  • HG-223 Hook & Hook

    Meets the performance requirements of Fed. Spec. FF-T791b , type 1, form 1:class 5. Can be equipped with optional locknuts ( HG4060 and HG4061 ) .

  • HG-225 Hook & Eye

    End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
    Hot Dip galvanized steel.
    Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4” through 1”, a shackle one size smaller
    can be reeved through eye.

  • HG-226 Eye & Eye

    End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
    Hot Dip galvanized steel.

  • HG-227 Jaw & Eye

    End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
    Hot Dip galvanized steel.

  • HG-228 Jaw & Jaw

    End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
    Hot Dip galvanized steel.
    TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.

  • HG-4060 Right Hand Lock Nuts

    For HG 223 , HG 225 , HG 226 , HG 227 & HG 228 Tumbuckles

  • HG-4061 Left Hand Lock Nuts

    For HG 223 , HG 225 , HG 226 , HG 227 & HG 228 Tumbuckles