Cleste ridicare verticala model IPNM10N Crosby®

Nou

IPNM10N - Standard vertical lifting clamp

IPNM10P - Vertical lifting clamp with protection cap

IPNM10P - Vertical lifting clamp with larger jaw opening & curved jaw opening

For materials where no damage is permitted

Mai multe detalii

Stoc epuizat

1 001,98 €

Cleste ridicare verticala model IPNM10N Crosby®
Se utilizeaza pentru ridicare , rotirea , mutarea sau transportul pe verticala a foilor , placilor de la orizontal la vertical fara a deteriora , zgaria suprafata materialului
Pot fi ridicate fara a fi zgariate materiale precum aluminiu, otel inoxidabil , materiale vopsite , carcasa aeronava , materiale compozite , sticla , plastic etc.
Se folosesc impreuna cu dispozitiv de lant ( chinga ridicare )
NOTA!!! Lantul / chingile se comercializeaza separat!
INFORMATII GENERALE
The IPNM10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed without marring the surface of the material. Materials such as aluminum, stainless steel, painted materials, aircraft skins, composite material, glass, plastic, etc., can be lifted without marring.
Will NOT mar , or scratch the material surface
For use in almost all sectors of industry where during the lift or transfer, no damage to the
material is permitted.
Available in capacities of .5, 1 and 2 metric tons.
Wide variety of jaw openings available: 0 to 38mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
Full 180° turning range for material transfer, turning or moving.
Lock open, lock closed ability with latch for pretension on material and then release of material.
Optional IP-5000 Stinger assembly available (see page 420).
Allows for easy connection between the clamp and hoist hook.
Material must be clean and dry.Maintenance replacement kits are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.
Model Working Load Limit (t)* IPNM10 Stock No. Weight Each (kg) Dimensions ( mm )
Jaw A B C D E F G H K
IPNM10N 0,5 2703811 2,7 0-10 84 159 235 40 128 60 41 11
IPNM10N 1 2703738 4,4 0-20 97 209 278 40 184 80 56 11
IPNM10 2 2703442 14,5 0-40 153 258 396 70 296 100 161 16
WITH PROTECTION CAP
IPNM10P 0,5 2703278 2,8 0-10 82 157 221 40 145 68 48 11
IPNM10P 1 2703279 4,5 0-20 97 195 276 40 205 82 66 11
WITH LARGER JAW OPENING & CURVED JAW OPENING
IPNM10NJ 1 2703814 4.7 20-37 97 220 321 40 200 80 56 11
IPNM10NJ1 1 2703819 5,5 0-25 97 238 351 40 213 80 63 11
*Design Factor based on EN 13155 and ASME B30.20
clesti universali ransport tabla prindere verticala, cleste ridicare vertical manevrare foi tabla, cleste ridicare vertical transport tabla, cleste ridicare vertical transport confectii metalice, clesti tabla orizontali dispozitive de ridicare ,clesti tabla ridicare transport vertical, clesti ridicare transport vertical al placilor de otel confectiilor metalice, dispozitive manevrare tabla - gafe , cleme industriale , clesti , cleste surub tabla , clesti teava,clesti tevi Total Race, clesti profile metalice,cleme tabla, cleme ridicare foi tabla,cleme surub.

Clesti ridicare IPNM Crosby®

Clesti ridicare verticala IPNM Crosby®

Descarca (243.83k)

No customer comments for the moment.

Scrieţi o recenzie

Scrieţi o recenzie